In 1971 J. Standard Baker Quoted " Drivers Towing Trailers Are Four (4) Times As Unsafe As Those In Cars Alone!
Contact Us - Newton County Enterprise
The Newton County Enterprise
305 E. Graham St.,
Kentland, IN 47951
We encourage and welcome articles and news submitted by e-mail.
Greg Perrotto, Group Publisher: firstname.lastname@example.org
Michelle Knapp, Print/Digital Advertising: email@example.com
Gregory Myers, Editor: firstname.lastname@example.org
Betty Long & Marlen Taden, Classifieds/Legal Notice/Circulation: email@example.com
Deadlines for Display Advertising:
The Newton County Enterprise: noon Friday prior to Wed. publication
The Indiana Spirit: noon Thursday prior to Tues. publication
The Brook Reporter, Morocco Courier: noon Friday prior to Wed. publication
Deadline for Legal Advertising:
The Newton County Enterprise: noon Tuesday
Brook Reporter, Morocco Courier: noon Tuesday
This boat trailer is chained in a way to make my dad proud.
Almost all boat trailers come with safety chains. Almost all tow vehicles come with special loops in their trailer hitch assembly to hook the chains once the trailer’s coupler is attached to the ball hitch. Almost no trailers ever pop loose from the vehicle on which they are being towed so the safety chains are about as necessary as wearing a helmet while playing cribbage.
It’s highly unlikely for anyone to get struck by lightning, but it happens often enough for people to be warned frequently about lightning’s danger and how to avoid being struck. So why aren’t there any warnings or directions about the proper use of safety chains? Is there a right or wrong way? Does something so simple need to have directions?
Of course not. Hook the darned things up anyway you wish. Hook ‘em long, hook ‘em with the hooks facing forward or backward. Hook them back on themselves. Run your rig with the chains crossed or uncrossed. Take one of the chains off and just use one. It won’t make a whit of difference 99.999 percent of the time since your trailer is unlikely to de-couple while you are hauling down the highway.
But what if you are the .001 percent guy who should wear a football helmet to a card game? What if your boat trailer does go loosey-goosey on the way to the lake? Are you about .001 seconds away from realizing properly adjusting and attaching your safely chains is something you shouldn’t have taken for granted? Eeeek!
Luckily, it’s not rocket science, it’s common sense, more than anything and there are only three or four major considerations.
First: Is the chain strong enough? The answer is probably yes, so don’t much worry about it. If it looks like a good strong chain it will likely do the job. If you are ever in a situation where there’s enough pull on the chain to break it, you are either pulling the Queen Mary or there’s some other driving issue going on with your truck and trailer and whether they are still chained together is probably the least of your worries.
Second: Should you hook the right chain to the right side chain loop or cross them, attaching the right chain to the left side of the trailer hitch and left chain on the right side? Either way will keep the Queen Mary behind your vehicle if the coupler breaks off. However, if you cross the chains, there’s a chance it will form a sort of “catch basket” cradling your trailer’s tongue keeping it a few inches from the pavement. That would give you maybe seven percent better control of what is happening just behind your back bumper — but seven percent is better than zero percent.
Third: Crossing your safety chains to make them a trailer tongue catcher only works if the chains are the correct length. If they are too long you’ll be blowing sparks when dragging the trailer tongue down the highway whether the chains are crossed or not.
On the other hand, if the chains are too short, plan on bending or breaking something when you turn too short going either forward or backward. Have you ever checked the length of your chains? The trailer manufacturer didn’t know where on your tow vehicle the chain was going to be attached so they just bolted on an average length.
Obviously, if the chains are dragging on the pavement when you are trailering, they are too long. If you bend or break something when turning they are too short. They can be lengthened or shortened a variety of ways if needed but you won’t know which to do unless you experiment.
Fourth: Most safety chains come with an open hook to simply hang them on the chain connector loop on the vehicle. They stay in place by a combination of magic and gravity. For people who don’t trust gravity or magic, hooks with a spring clip can be substituted which stay in place with a springy thingy. I believe as much in gravity and magic as a springy-things.
Decades ago, the first time I watched my dad hook up our boat trailer, he hooked the safety chain hook to the vehicle from underneath, the opening of the hook facing to the rear. “If you hook it the other way, it will fall off,” he explained. So for the next 20 years or so, I backwards-hooked my trailers.
Then I saw a guy hook his safety hook with the opening forward. “Don’t they occasionally fall off hooked like that?” I asked.
“Never,” he said.
“Hmmm, must be magic,” I thought.
So for the next year I hooked one side frontwards, one backwards and in the end, gravity and magic worked identically. Neither side ever came unhooked and I put about 10,000 miles each year on my trailer and hit about 10,000 potholes, it seems.
Now I hook them frontwards, just because it’s easier and like most people, I just like to do things a bit differently than my parents.
This quote from a reporter makes me sick...and needs to outrage all the families....
Almost no trailers ever pop loose from the vehicle on which they are being towed so the safety chains are about as necessary as wearing a helmet while playing cribbage.
Safety Chains - Safe Enough?
By Mike Schoonveld
9 hrs ago
His E Mail For Everybody Here it is ..
Give Him A Piece Of Your Mind.....please